Cross-arm 13 holes
Angle bar section with 13 holes
The Telenco® 5/15 is an angled bar section used for the parallel deployment of overhead lines. Presenting 13 pre-drilled holes, this cross-arm is to be mounted on a pole bracket adapted for its mounting support. The 5/15 pole line hardware enables
thus fastening points for dead-ending or suspension applications. Thanks to its 820mm length, this cross-arm enables to offset cables from poles and thus protect them against environmental constraints.
Telenco® 5/15 cross-arm can receive at
its extremity a drop anchoring plate for the anchoring of drop cables perpendicularly to the main network.
Installation:
- On wooden poles with a cross-arm bracket 5/16
- On steel poles with integrated slot, directly into the slot
- On an extension bracket square tube REFO
- On concrete utility poles with 2 cross-arm bracket 5/39
- On wooden utility poles with a cross-arm bracket CPB.